Accu-Chek® Instant S Blood Glucose Meter

Product Features

• The Intuitive target range indicator gives you visual reassurance. It can be individualized to suit your personal therapy goals*
• Only what you need – Your test result and your averages (7/30/90 days) are visible on the meter
• No set up required – Just insert a strip, apply a small blood sample, and read your blood glucose result on the large display
• Easy-edge test strip – Apply a small drop of blood anywhere along the wide, yellow edge
• Proven accuracy guaranteed by the makers of the Accu-Chek brand, fulfilling the requirements of the ISO 15197:2013^
• Test strips come in a 10, 25, 50 vial, so you can choose whatever fits your budget or therapy
• Enjoy virtually pain-free testing with the Accu-Chek Softclix lancing device
• Blood glucose values (Lows≤69 mg/dL, Normal 70-160 mg/dL, High≥161/dL) are pre-set on the Target Range Indicator and must be interpreted in conjunction with the appropriate medical condition at the time of taking reading, and in accordance with advice of your physician.
  ^ Criterion A of clause 6.3 for the lot tested (Freckmann et al., JDST, 6(5), 2012)

Technical Specifications

How to Use

• Wash your hands with warm soapy water and dry thoroughly. Prepare the lancing device.
• Check the use by date on the test strip container. Do not use test strips past the use by date.
• Remove a test strip from the test strip container. Close the cap tightly.
• Insert the metallic end of the test strip into the meter. The meter turns on.
• When a flashing drop symbol appears, perform a fingerstick with the lancing device.
• Gently squeeze your finger to assist the blood flow. This helps you get a blood drop.
• Touch the yellow edge of the test strip to the blood drop. Remove your finger from the test strip when the flashing hourglass symbol appears. Do not put blood on top of the test strip.
• Your test result appears with an arrow. This arrow shows if your test result falls above, within, or below the target range.* The target range is represented by the green region of the target range indicator. The arrow will flash if your test result falls above or below this range.
  Remove and discard the used test strip.